MX24 24" Wheels

BMX Flip Flop hubs on 32mm BSX Tornado rims. Ideal economic priced race/dirt wheels for Identiti P-45 or any Cruiser BMX bike.

Light and Strong, angular style box section rim, with eyelets and a stable screw-pin joint.

Sealed bearing Gusset Huka "Flip Flop" single speed BMX hubs and Black ED finished spokes. Black Anodised finish 32mm rims - 36 hole Front and 48H hole rear for optimised weight/strengh.

- Halo 32mm Tornado rims with eyelets

- Black ED 14g spokes and black nipples

- Weight/strength optimised 36H front, 48H rear spoking

- Gusset BMX FS 14mm sealed bearing front hub

- Gusset BMX FS 14mm Flip Flop sealed bearing rear hub

- 24" MTB (BMX hubs)

- Black anodised finish

Important Notes:

NO DISK mount is possible on these hubs - therefore these wheels are suitable only for rim brakes. These hubs are BMX standard 14mm - and are generally not compatible with MTB standard frames or forks.

The Front hub is spaced at 100mm (same as regular forks) - but using a 14mm BMX axle (suitable for pegs). This makes for a very clean looking BMX/Dirt front end. It is ONLY compatible with 14mm BMX style dropouts (option with Identiti Rebate forks)

The Rear hub is a 110mm spaced BMX Single Speed Flip Flop hub with 14mm axle (suitable for pegs). This hub accepts 2 different sizes or screw-on freewheel. 1 each side; standard and Mini. This wheel can be run both ways - hence Flip Flop type - depending on Freewheel selected.

Rear hub spacing is 110mm (BMX standard) and can be run on any BMX standard 24" bike.

Note: Not compatible with most MTB frames - which are 135mm (or more) spacing.