MX24 Pro 24" Wheels

Halo MX Pro BMX cassette hubs on 36mm SAS rims.

Pro level Jump/park wheels for Identiti P-45 or any Cruiser BMX bike.

Massively strong, SAS box section rim, with double eyelets and DJS joint.

Sealed bearing Halo MX Pro single speed cassette BMX hubs and Black ED finished spokes.

Black anodised finish 36mm SAS rims - 36 hole Front and 48H hole rear for optimised weight/strength.

- Halo 36mm SAS rims with double eyelets

- Black ED 14g spokes and black nipples

- Weight/strength optimised 36H front, 48H rear spoking

- Halo MX Pro BMX FS 14mm sealed bearing front hub

- Halo MX Pro BMX FS 14mm sealed bearing cassette rear hub with 11T cog

- 24" MTB (BMX hubs)

- Black anodised finish

Important Notes:

NO DISK mount is possible on these hubs - therefore these wheels are suitable only for rim brakes. These hubs are BMX standard 14mm - and are generally not compatible with MTB standard frames or forks.

The Front hub is spaced at 100mm (same as regular forks) - but using a 14mm BMX axle (suitable for pegs). This makes for a very clean looking BMX/Dirt front end. It is ONLY compatible with 14mm BMX style dropouts (option with Identiti Rebate forks)

The Rear hub is a 110mm spaced BMX Single Speed cassette hub with 14mm axle (suitable for pegs) and 11T cog fitted standard. The 11T Cassette cog can be changed to 10 or 12T (see Mini screw-on cogs section).

Rear hub spacing is 110mm (BMX standard) and can be run on any BMX standard 24" bike.

Note: Not compatible with most MTB frames - which are 135mm (or more) spacing.

See hubs section for more hub compatability information.